We get asked “Why won’t my knives cut, or why are my chisels pulling hair?” a lot, and also periodically it comes in the develop of a statement, “My clipper/trimmer chisels quit cutting/began pulling hair, so I threw them (“them” being the blades and periodically the whole clipper/trimmer!) away.” We HATE hearing around civilization throwing their money away, bereason 9 out of 10 times we deserve to assist you get your blades cutting aacquire for much less than a brand-new blade and also CERTAINLY a lot less than a brand-new clipper/trimmer. The time that we can’t gain your knives cutting aget, the blade is tramelted and does need to be RECYCLED. Don’t simply toss your chisels, please recycle them.

You are watching: Why are my andis t outliners pulling hair

So, how does someone gain a blade that is not cutting or is pulling hair to start cutting again? Just follow T.O.P. C.A.T.S.

*
Infographic that you have the right to download or print.

T. = Teeth

O. = Oil

P. = Power

C. = Clean

A. = Alignment

T. = Tension

S. = Sharpen

T. = Teeth

The first check that you perform is on the teeth of the blades. Are all the teeth still on the stationary blade? Are all the teeth still on the cutting blade? Are all the teeth straight? If you are absent teeth, then you have to seriously consider replacing the blade. If you still have all the teeth, then move to the next action.

O. = Oil

Yep, this is the one that gets a lot of human being. For some factor oiling the chisels is somepoint that world refusage to do as soon as this one action will save you even more money than anything else. It keeps your knives functioning properly and keeps them from wearing out as quickly. Go below to review about the correct method to oil your knives.

P. = Power

Your third check will be the power of the clipper/trimmer. Is there sufficient power to move the cutting blade rapid enough to cut? Turn the tool on and pinch the cutting blade and also the stationary blade together. If you can soptimal the cutting blade with exceptionally bit press, then your power is as well weak, and also you will need to clean out your tool and/or readjust the power (upcoming article).

C. = Clean

If all the teeth are present and your power is good, then you will have to clean your knives. Carecompletely rerelocate the knives from the clipper/trimmer. Thoabout clean the chisels using a cleaner particularly made to clean and treatment for your blades and a stiff nylon bristled brush. We usage and highly recommfinish the cleaner and disinfectant H-42. Ensure that ALL hair and dirt has actually been rerelocated from the knives and from in between the teeth of the blades. Dry the knives with a towel and also reassemble the blades. Also, inspect for rust BETWEEN the teeth. You execute this after you have actually thoaround cleaned the blades because you do not desire to replace a blade that was ssuggest dirty and also not rusty. If tbelow is rust damages in between the teeth, then you will certainly must relocation the blade. The rust dulls your chisels and also will certainly continue to dull the knives also if they are sharpened.

A. = Alignment

After cleaning your chisels, then you MUST align the knives or they will not reduced effectively no matter exactly how clean and also shiny they are. Encertain that the stationary blade and also the cutting blade are parallel and also gapped accordingly (Upcoming article). Each clipper/trimmer cuts much better at different gappings because of just how they are designed, however ALL clipper and trimmer knives MUST be parallel to cut effectively. Do not look through the teeth (Picture A). Turn the blade to the side so that they teeth lineup which renders it much easier for you to gap (Picture B).

*
(Picture A – WRONG WAY!)

*
(Picture B – CORRECT WAY!)

T. = Tension

Tension is of the utmany prominence as soon as it pertains to your blades functioning effectively. ALL chisels have actually some create of stress forcing the cutting blade versus the stationary blade. If this tension is too a lot, then the cutting blade will certainly not move or will relocate poorly. If your tension is also little, then the chisels will certainly rattle, will certainly pull hair, or will clog up via hair stuck between the blades which will certainly speak the cutting blade from moving/cutting. Either way your tool will not cut correctly. (Upcoming article)

S.= Sharpen

Finally, if you have actually effectively followed the above measures and also your knives still carry out not cut or are pulling hair, then you have to look at having the knives sharpened by someone that knows what they are doing or completely replacing the chisels. We suggest getting your chisels sharpened as many kind of times as feasible prior to replacing them through new blades. This saves you money and conserves on blades being thrown amethod (or preferably recycled). Blades that have actually been sharpened by a expert that knows what they are doing will reduced and a brand-new blade (occasionally better) and also will organize that edge just as lengthy as a new blade.

Now if you hear anyone ask, “Why won’t my chisels reduced, or why are my chisels pulling hair?” you can tell them to follow T.O.P. C.A.T.S. and aid them diagnose the trouble.

See more: Why Is Carbon Important For Forming Complicated Molecules ? Or Why Carbon Makes A Large Number Of Molecules

Finally, T.O.P. C.A.T.S. is not just for old blades that are not cutting. You must apply the exact same steps after you acquire back your sharpened chisels or after obtaining a new blade. The carriers that develop blades perform make mistakes occasionally, as carry out professional sharpeners, and at a minimum, you will should align the chisels properly before making use of them.