Bottle Cutting - What You Need To Know

Tbelow are numerous methods to reduced or break a glass bottle or jar and also having actually tried them all I thought it was about time I mutual my favourite method via you. This approach is fool proof. Its quick and easy and leaves you through the cleacolony cut.

You are watching: How to cut wine bottles at an angle

Tright here are other even more convoluted and also intricate approaches out there for cutting glass bottles yet you really don"t should be putting anypoint in the oven, blow torching anything, heating wire, string or putting bottles into freezers, so cast those ideregarding one side.

First I"ll explain in information, in addition to imeras, my technique of cutting glass bottles that anyone deserve to carry out at home through just one tool. I"ll then go on to display you exactly how to smooth off the edges for that expert look withot the usage of a kiln or warm.

If you"re analysis this then I"m sure you have actually many intentions of what wonderful things you"ll be doing through your recycled wine and beer bottles as soon as you"ve reduced them, yet if you need some principles I"ll add some at the bottom of the short article via which to inspire you.

Firstly, allows get our bottle all set by rerelocating the labels.

Removing the Labels From Glass Bottles.

Some labels will certainly peel off less complicated than others so allows go via the actions.

1. Submerge the bottle in a sink with hot water and leave for 10 minutes. With this method some labels will certainly simply peel off nice and quickly.

2. Some labels will only be softened through the over strategy so in this case scrape what you can off through a knife and then usage a kitchen scrubbing brush or wire brush to rerelocate the remainder.

3. If there"s still sticky residue left that won"t come off via your kitchen scrubbing brush, rub a tiny nail varnish remover or lighter liquid onto it and this will come away.

Helpful Note: Labels have the right to be supplied as a cutting guide if they are in the place wbelow you want the break to be. Leave them on and rerelocate them later on once you"ve reduced the bottle.

Since publishing this short article someone has written in to tell us his method of removing the labels from bottles. I"ve not tried it yet, however this sounds good:

1. Use a paste of equal components olive oil and baking soda.

2. Rub the paste onto the label

3. Leave for a couple of minutes then scrub off. The label and glue will certainly simply fall acomponent.

How to Cut Glass Bottles via a Glass Cutter and Water

There are many type of arrays of cutters however a consistent dry wheel cutter will certainly suffice. (See better on in this write-up to read around oil cutters)

A great glass cutting tool is exceptionally affordable and also if you buy one through a tungsten carbide wheel such as the renowned brand "Toyo" it will certainly last you for years and also ensure a clean score line each time.

What You will Need:

Masking tapeBoiled waterRunning Cold water tapRubber glove (to hold the bottle whilst putting boiling water)

Buy the TOYO Glass Cutter here

Step 1. How to Cut a Glass Bottle - Mark Your Cutting Line

*

Place a spilgrimage of masking tape about the glass bottle where you wish to reduced. This will certainly act as your overview and also encertain you have a neat circle that meets around the bottle. Make certain that wright here the ends of the masking tape accomplish up that you have a neat right line, this will help ensure you don"t have a jagged cut.

Helpful Note. As I pointed out earlier, labels have the right to be supplied as a cutting overview if they are in the area wbelow you want the break to be. Leave them on and also remove them later as soon as you"ve reduced the bottle.

Tip 2. Cutting Glass Bottles - Score Your Cutting Line

*

1. Rest your arm on somepoint that will elevate it slightly such as a folded up towel. This helps to store your hand secure and at a great angle

2. With your Toyo glass cutter, score the glass bottle alengthy the line of the masking tape all the method approximately the bottle. ( I sit the edge of the cutter up against the edge of the masking tape)

Helpful Note: Try to make as constant a reduced line as possible as this will assist store the reduced edge as neat as possible and save you having to file or deburr also much to smooth off the edges.

Tip 3. How to Cut Glass making use of Hot & Cold Water

*

1. Take your bottle to the running cold water tap and whilst wearing your rubber glove on the hand you organize the bottle with, pour a little trickle of boiling water over the score line, rotating the bottle about as you do so. (you"ll notice in the over image I was not wearing a rubber glove - exceptionally naughty. As my Mum offered to say: Do as I say, not as I do!)

2. Next, run the bottle under the cold tap whilst rotating the bottle.

3. Repeat this procedure, alternating in between the hot water and the cold water. When you start to hear the bottle making popping or cracking sounds it"s about all set to fall away. This procedure takes a couple of minutes and also you"ll be left holding a item of bottle in each hand also.

4. Job done.

Helpful Note 1. Some people discover It advantageous to remainder the bottle in a "V" form apparatus if you can discover one, or indeed make one if you"re handy in the lumber melted. This helps rest the bottle steady and you have the right to rotate the bottle easily. Bottle cutting jigs have the right to also be bought that come via a glass cutter solved, however these perform not always job-related very well, or for incredibly lengthy.

Helpful Keep in mind 2.If you wish to cut in the direction of the very bottom of the bottle, keep the bottle standing upappropriate, remainder your cutting hand also on somepoint that will certainly elevate your hand and ssuggest score the line whilst rotating the bottle at the same time.

Step 4. Smooth the Edges of your Cut Glass Bottle

*

Tbelow are many ways to smooth the edge of your bottle and it all depends exactly how much or exactly how little bit you want to spfinish, just how polished you desire it to look and what devices and also tools you might already have actually that you have the right to usage.

To warmth the glass sufficient in order to re-mould the edges and also really provide a skilled end up will take the usage of a kiln so the complying with cold-working choices are simply basic methods through which to polish your edges without firing.

At the bottom there is a brief summary of how I polimelted these specific bottle edges checked out here in this post by sindicate using a big 600 grit diamond file.

For removing any type of snags and to even out the edge:

or if you have these items at home they will certainly likewise work-related well.

wet and dry sand paper 150-600 grit

For better fine polishing (optional):

Using the Diamond File and other grinding polishers:

Use the file wet and also gradually file away till you reach the smooth surchallenge you"re looking for. It renders a painful noise at initially favor nails down a blackboard, however bare via it! It eases off.

I supplied a square shaped, big diamond 600 grit file. Any shape such as a triangle, flat or half round will occupational too. For small glass drinking bottles or beer bottles I discover a huge file will certainly file both sides at once bereason it"s long enough. This is excellent because it suggests I gain even sides and also both sides acquire filed dvery own at the same time. Handy!

Personally speaking, utilizing a diamond file is commonly enough however if you want to polish up even more you deserve to try any type of variety of the various other choices I"ve discussed over. The babsence silicone polisher offered in a rotary hand tool works exceptionally well.

Any lumps and bumps along your edges have the right to easily be rerelocated by utilizing a diamond cylinder burr or a 3mm diamond drill bit. Do this before you file or polish. Go carefully through this though, it is extremely abrasive and also if you"re not used to using burrs in a rotary tool, one slip could reason your recently reduced glass bottle to be scratched and also damaged.

As with all these alternatives, they are abrasives so be cautious to stick to the edge and also if you"re making use of a rotating tool through any kind of of the attachments be particularly cautious to keep a secure hand and also do not go over the edges. It sounds evident, but I"ve done it numerous times myself and then had to start all over via a brand-new glass bottle. (it may suppose you gain to reap another bottle of wine or beer however - there"s constantly an upside)

Helpful note 1. It is better to use the best abrasive you can and grind ameans for longer quite than start through an abrasive that is as well coarse. You will discover little bit "bleed cracks" all the means around the edge if the abrasive is also coarse.

Helpful note 2. If the tool or attachment you are using is made of diamond grit i.e diamond file, diamond burr always usage them wet.

Rather than smooth the edges off, why not attempt scalloping the edges or making them wavy. Any number of diamond burrs in a rotary tool will certainly carry out this for you however I favor to use a 3mm diamond drill little bit for this.

Safety Precautions

It goes without saying that water and also electrical energy carry out not mix so please be added vigilant if you are utilizing a rotating tool near water, preferably in a flexible shaft. Always wear goggles, confront mask and also long sleeves.

*

To oil or not to oil, that is the question.

Tright here are many type of traditionalists that prefer to usage oil via their glass cutters. With the advanced tungsten carbide wheels that are currently provided in glass cutters, oil is no much longer vital. The carbide cutting blade or wheel ensures you end up through a clean and neat cut and bereason tungsten carbide is so resilient it will not dull conveniently.

If you still feel prefer you would certainly choose to usage oil it"s best to pour a little amount onto a item of towel in a bottle lid or small container and also dab the cutter right into it prior to using.

Cutting a form into a glass bottle

The finest strategy to cut a shape into a glass bottle is to initially drill a hole in the bottle through a diamond core drill and then usage a diamond cylinder burr or similar shape to grind ameans from the inside of the hole outwards in the shape you wish to make.

See our infographic below on how to drill a hole in a glass bottle

Recycled glass bottles deserve to be turned into many imaginative and also beneficial items, here"s a couple of principles for you:

wine bottle bird feederstumblers decorated through mosaic tiles or engravedwind chimeslanterns, lamps and candle holdersvases and also posy potswater carafespen potsstorage jarstooth pick holders

*

The above work from left to best is of a recycled water carafe and also tumbler by re-modern.com, slices of cut wine and also beer bottle light strand by Jonas Merian. Bottom row is a recycled wine bottle candle by Lina Smith, engraved reduced wine bottle wind chime by Stewart Neal and decorative glasses by Christine Majul on flickr.

Trouble Shooting Tips

Crack lines approximately the height of the bottle might create as a result of a variety of different factors. If you have actually a bottle you can not use bereason it has broken in the wrong location, don"t bin it, use this bottle to practice with.

Below, I"ve provided some of the potential factors for cracking and also how to stop it.

1. If you have the right to, attempt to make the score line consistent. Wbelow you sheight the line and also start aobtain is where you might discover the cracking. This is simpler to perform if you have some way of turning the bottle whilst scoring. Many kind of human being make their very own wood ‘jig’ which is fundamentally 2 pieces of lumber that form a V channel in the middle that the bottle sits in. This way you revolve the bottle through one hand and also perform the score line through the various other. I don’t use this strategy personally yet you might uncover it helps.2. Practice via the water temperatures- if the water is also hot and too a lot warm in one go, your break will take place as well shortly and this can reason cracking3) Don"t be tempted to score deeper, this shouldn"t make any kind of distinction, however you must use enough push so you can watch the score line clearly. Aget, practice on a damaged bottle to discover the right pressure.4) Try a different kind of bottle - this can sound apparent, but the finest bottles I discover for my work-related are little, clear glass, water bottles. The glass appears to be a lot, much thinner than other bottles and also I acquire a clean cut every time. Red or white wine bottles will certainly differ in the thickness of the glass so you can never tell whether or not the bottle is going to be a basic one to break.

Helpful Note: Remember you will never acquire a totally smooth break, you will always need to file dvery own some sharp edges or snags via a diamond file.

Good idea: Instead of wasting the good job-related you’ve done, exactly how around trying to decoprice the lip of the reduced bottle with ribbon or lace, or glue on beads, pieces of drifttimber, sea glass and also incredibly tiny pebbles utilizing a strong adhesive such as G-S Hypo Cement Adhesive.

See more: Pres I Came Here To Lead Not To Read, President Schwarzenegger

This fabulous creation by Louise Nelson of Glassdaft is a super example of just how artistic and also creative you deserve to be with some empty glass bottles.