One finish of the tube is connected to the tank and also the other end is opened i.e. press because of the elevation of the manometric liquid is balanced by the pressure in the tank.

You are watching: A manometer is used to measure the pressure of the

Taking lower point of manometric fluid asrecommendation suggest (Horizontal recommendation line with this),

P=Pa+ρmgh

wright here,

P = Absolutepush of tank,ρm= thickness of manometric fluid, h = column height

Calculation:

Given:

Patm= 96 kPa,ρ = 0.85× 1000 = 850 kg/m3, h = 55 cm = 0.55 m

Because of this for absolute pressure,

⇒ P= 96000+ 850 ×10 × 0.55

⇒ P = 100.675 kPa

Downfill Equipment PDF
Share on Whatsapp
India’s #1 Learning Platform
Start Complete Exam Preparation

Daily Live MasterClasses

Practice Inquiry Bank

Mock Tests & Quizzes
Trusted by 2,15,59,801+ Students
‹‹ Previous Ques
Next off Ques ››

## More Pressure Measuring Instruments Questions

Q1. A U - tube manometer
Q2. A manometer is supplied for the push measurement in a closed tank. The three fluids f1, f2 and f3 have actually certain weights γ, 2γ and also 0.5γ, respectively. The schematic arrangement through manometric reading and also other dimensions are displayed in the number. In order to encertain zero gauge push in the tank at the mid-elevation level (h/2), the height of the tank h(in m) is ______.
Q3. The figures display the cross-section of an oil pipe through a manometer attached. On the right side of the manometer, the manometer liquid is in call via oil, and on the left side, the manometer is open to the atmosphere. The oil has actually a particular gravity of 0.85 and also the manometer fluid has a specific gravity of 1.5. What is the gauge press at the facility of the pipe if hm is 10 cm and also ho is 5 cm?
Q4. A piezometer tube is provided just for measuring
Q5. The primary typical for calibrating vacuum is:
Q6. Sensitivity of U-tube manometer via inclined leg counts on:
Q7. To measure exceptionally high push a pressure gauge supplied is-
Q8. The gadget provided for measuring the push at a point in a fluid by balancing the column of liquid by the exact same or an additional column of the liquid is recognized as:
Q9. Which of the complying with tools is offered to meacertain fluid pressure?
Q10. ________ actions heat loss from a heated wire to measure pressure.

## More Pressure Measurement Questions

Q1. Pressure variation of air over sea level is:
Q2. A U - tube manometer
Q3. The gauge press in a liquid at a depth of 3 m is review to be 28 kPa. The gauge push in the same liquid at the depth of 12 m will certainly be:
Q4. What is the water push on the sea bottom at a depth of 6500 m? The particular gravity of sea water is assumed to be 1.03.
Q5. A manometer is used for the push measurement in a closed tank. The 3 fluids f1, f2 and also f3 have certain weights γ, 2γ and 0.5γ, respectively. The schematic arrangement through manometric analysis and other dimensions are displayed in the figure. In order to encertain zero gauge press in the tank at the mid-elevation level (h/2), the height of the tank h(in m) is ______.

See more: “ Why Are You Subjecting Me To This ?" “Why Are You Subjecting Me To This

Q6. Blood push is measured by mercury manometer and a stethoscope by wrapping a closed air-filled jacket approximately the top arm of a perkid at the level of the heart. The systolic press (the maximum press once the heart is pumping) and also the diastolic push (the minimum pressure when the heart is resting) of a healthy and balanced perkid are suggested as 120/80 respectively. These values are expressedin:
Q7. The numbers display the cross-area of an oil pipe via a manometer attached. On the right side of the manometer, the manometer liquid is in call through oil, and also on the left side, the manometer is open up to the atmosphere. The oil has a particular gravity of 0.85 and the manometer liquid has actually a specific gravity of 1.5. What is the gauge push at the center of the pipe if hm is 10 cm and ho is 5 cm?
Q8. A piezometer tube is offered only for measuring
Q9. For a static fluid, the boost of press at any kind of suggest inside the liquid, in a vertically downward direction, should be equal to the product of the ________ of the fluid and depth from the totally free surconfront.
Q10. At sea level, under normal problems, what is the atmospheric pressure?
Suggested Test Series
View All >
ISRO Scientist ME Mock Test 2021
103 Total Tests 1 Free Tests
Start Free Test
Suggested Exams

ISRO Technical Assistant

ISRO Scientist ME
GATE ME

### ISRO Technical Assistant Important Links

Eligibility CriteriaSalary & Job ProfileAdmit CardSyllabus and Exam PatternAnswer KeyCut OffBooksPrevious Year PapersResult

## More Fluid Mechanics Questions

Q1. A directly 100 m long raw water gravity major is to carry water from an intake framework to the jack well of a water therapy plant. The compelled flow via this water main is 0.21 m3 /s. Allowable velocity via the main is 0.75 m/s. Assume f = 0.01, g = 9.81 m/s2 . The minimum gradient (in cm/100 m length) to be provided to this gravity major so that the forced amount of water flows without any type of difficulty is ___________
Q2. An incompressible liquid is flowing at a secure price in a horizontal pipe. From a section, the pipe divides into two horizontal parallel pipes of diameters d1 and also d2 (wright here d1 = 4d2) that run for a distance of L each and then aacquire sign up with back to a pipe of the original size. For both the parallel pipes, assume the head loss due to friction only and also the Darcy-Weisbach friction element to be the very same. The velocity ratio in between the bigger and also the smaller sized branched pipes is _________
Q3. Three rigid buckets, shown as in the numbers (1), (2) and (3), are of similar heights and base locations. Additional, assume that each of these buckets have negligible mass and also are complete of water. The weights of water in these buckets are deprovided as W1, W2, and also W3 respectively. Also, let the pressure of water on the base of the bucket be deprovided as F1, F2, and also F3 respectively. The option giving a specific description of the system physics is
Q4. A rectangular channel having a bed slope of 0.0001, width 3.0 m and Manning’s coeffective ‘n’ 0.015, carries a discharge of 1.0 m3 /s. Given that the normal depth of circulation varieties in between 0.76 m and also 0.8 m. The minimum width of a throat (in m) that is possible at a given section, while ensuring that the prevailing normal depth is not gone beyond alengthy the reach upstream of the contractivity, is roughly equal to (assume negligible losses)
Q5. ​A venturi meter, having actually a diameter of 7.5 cm at the throat and 15 cm at the enlarged end, is mounted in a horizontal pipeline of 15 cm diameter. The pipe carries an incompressible liquid at a secure price of 30 litres per second. The distinction of push head measured in terms of the relocating fluid in in between the enlarged and the throat of the venturimeter is observed to be 2.45 m. Taking the acceleration because of gravity as 9.81 m/s 2, the coeffective of discharge of the venturi meter (correct as much as 2 places of decimal) is
Q6. A horizontal jet of water with its cross-sectional location of 0.0028 m2 hits a fixed vertical plate via a velocity of 5 m/s. After impact, the jet splits symmetrically in a plane parallel to the airplane of the plate. The pressure of impact (in N) of the jet on the plate is:
Q7. A 0.3 m diameter pipeline terminates in a nozzle of outlet diameter = 0.15 m. The complimentary jet from the nozzle is deflected through 90° by a flat plate as displayed. When water flows with this pipe at a rate of 0.25 m3/second, the pressure forced to organize the plate is many nearly:
Q8. A suppressed sharp crested weir is 0.6 m high and also discharge water at a head of 1.2 m. The coreliable of discharge of this weir is:
Q9. A racing vehicle has actually a fuel tank which is partly filled. The car gets right into motion in the horizontal direction at a unidevelop acceleration equal to 'g'. The complimentary surface of the liquid fuel in the tank will assume a slope (with the horizontal) of:
Q10. For an inviscid circulation, if the boundary is stationary and flow is assumed one-dimensional and also if V is the velocity of flow then the velocity of layer next to the boundary is:
nlinux.org Edu Solutions Pvt. Ltd.
first & second Floor, Zion Building, Plot No. 273, Sector 10, Kharghar, Navi Mumbai - 410210

Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on nlinux.orgPartnersMediaSitemap
Products
Test Seriesnlinux.org PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks